-
Saddle clips are used to attach grating to structural members.
A popular method of attaching grating to structures involves formed metal pieces, variously called saddle clips, butterfly clips, and M-Clips, placed onto the grating top surface and attached with a suitable screw, bolt, or pin to the structure. All of our saddle clips are designed for use with a 0.25” diameter fastener.
Saddle Clips offered by our company include the following units:
SSI-60-1: This saddle clip is designed for use on fiberglass, pultruded gratings that are 1” in height. Like the SSF-10, it is resistant to corrosion, due to its stainless steel material. SSI-60-1.5: This saddle clip is designed for fiberglass, pultruded gratings that are 1.5” in height or more. It can also be used on 1.5” square mesh fiberglass gratings. It is also made of stainless steel.
-
Saddle clips are used to attach grating to structural members.
A popular method of attaching grating to structures involves formed metal pieces, variously called saddle clips, butterfly clips, and M-Clips, placed onto the grating top surface and attached with a suitable screw, bolt, or pin to the structure. All of our saddle clips are designed for use with a 0.25” diameter fastener.
Saddle Clips offered by our company include the following units: GSCF-10: The most common saddle clip, this clip is used to fasten 19-space grating to structures. It has an oval-shaped hole, which will accommodate either a screw or a carriage bolt.
SSF-10: This is the stainless version of the F-10 series. It is resistant to corrosion in most environments, due to its 316SS stainless steel material. SADDLE CLIP INFORMATION PAGE SADDLE CLIP F-10 INFORMATION PAGE -
Attach grating to steel members with horizontal edges in selected corrosive environments.
G-Clip Model WSSGG is a 316-stainless steel grating fastener used to fasten bar grating to metal or other structural shapes, where the structural flange is in a horizontal plane. Other stainless steel tops are available for use with the SSGG grip-jaw, to be used on popular pultruded and molded fiberglass gratings. G-Clip Model WSSGG fastener consists of three parts, which are assembled at our Louisiana factory into a complete installation unit, packed 50 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. MODEL WSSGG PRODUCT INFORMATION SHEET VIEW WSSGG-CLIP PRODUCT ENGINEERING DETAIL -
Attach Odd Shaped Bar Grating to Structural Shapes
G-Clip model RSSGG is a 316-stainless steel grating fastener used to fasten odd-shaped bar grating to metal or other structural shapes, where the structural flange is in a horizontal plane. Other stainless steel tops are available for use with the SSGG grip-jaw, to be used on popular pultruded and molded fiberglass gratings, or in highly corrosive environments. G-Clip model RSSGG fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 50 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. VIEW RSSGG PRODUCT INFORMATION SHEET VIEW RSSGG PRODUCT ENGINEERING DETAIL -
Attach Pultruded Grating to Steel Structures
G-Clip Model FSSGG is a 316-stainless steel grating fastener used to fasten pultruded bar grating to metal or other structural shapes, where the structural flange is in a horizontal plane. The specially shaped top is designed to fit pultruded grating shapes, while restricting the spreading of the bearing bars. G-Clip model FSSGG fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 25 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. MODEL FSSGG INFORMATION PAGE VIEW FSSGG-CLIP PRODUCT ENGINEERING DETAIL -
316 Stainless Steel top fits into 2" square-mesh fiberglass
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
316 Stainless Steel top is designed to fit 1-1/2" square-mesh fiberglass grating
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
316 Stainless Steel top fits into either a 3/4" or 1" wide slot of any grating
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
316 Stainless Steel top fits specialty gratings on 2-3/8" bar spacing, and other wide-spaced gratings
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
316 stainless steel top is made to fit pultruded fiberglass gratings
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
Galvanized carbon steel top and 316 stainless steel top fits 1- 3/16" c/l metal bar gratings.
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units, and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating, when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
GT-R Galvanized top fits onto almost any grating surface, especially those with close bar spaces.
SSGT-R model in 316-stainless steel
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units, and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating, when compared to saddle clips. These G-Clips tops are available in any quantity. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET