-
Attach grating to steel members with horizontal edges in selected corrosive environments.
G-Clip Model WSSGG is a 316-stainless steel grating fastener used to fasten bar grating to metal or other structural shapes, where the structural flange is in a horizontal plane. Other stainless steel tops are available for use with the SSGG grip-jaw, to be used on popular pultruded and molded fiberglass gratings. G-Clip Model WSSGG fastener consists of three parts, which are assembled at our Louisiana factory into a complete installation unit, packed 50 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. MODEL WSSGG PRODUCT INFORMATION SHEET VIEW WSSGG-CLIP PRODUCT ENGINEERING DETAIL -
Attach Odd Shaped Bar Grating to Structural Shapes
G-Clip model RSSGG is a 316-stainless steel grating fastener used to fasten odd-shaped bar grating to metal or other structural shapes, where the structural flange is in a horizontal plane. Other stainless steel tops are available for use with the SSGG grip-jaw, to be used on popular pultruded and molded fiberglass gratings, or in highly corrosive environments. G-Clip model RSSGG fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 50 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. VIEW RSSGG PRODUCT INFORMATION SHEET VIEW RSSGG PRODUCT ENGINEERING DETAIL -
Attach Odd Shaped Bar Grating to Structural Shapes Where the Flange is in a Horizontal Plane
G-Clip model RGN is a galvanized carbon steel grating fastener used to fasten odd-spaced gratings to structural members, where the flange is in a horizontal plane. G-Clip model RGN fastener consists of three parts, which are assembled at our Louisiana factory into a complete installation unit, packed 50 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. VIEW MODEL RGN INFORMATION SHEET VIEW MODEL RGN ENGINEERING DETAIL -
Model GN-1 "Narrow-Grip"
Attach 15-space grating to structures with horizontal edges.G-Clip model GN-1 is a galvanized carbon steel grating fastener used to fasten 15-space bar grating to structural shapes, where the structural flange is in a horizontal plane. This unit has a narrower width than our GG-1 series.
GN-1 "Narrow Grip" INFORMATION SHEET VIEW GN-1 PRODUCT ENGINEERING DETAIL -
Attach 19-space Bar Grating to Structural Surfaces Ranging in Thickness from .75” up to 1.25” thick.
G-Clip model GG-2 is a galvanized carbon steel grating fastener used to fasten 19-space bar grating to structural member edges ranging in thickness from .75” up to 1.25” thick. G-Clip model GG-2 fastener consists of three parts, which are assembled at our Louisiana factory into a complete installation unit, packed 50 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. VIEW GG-2 PRODUCT INFORMATION SHEET VIEW GG-2 PRODUCT ENGINEERING DETAIL -
Model GG-0 "Short-Grip"
G-Clip Model GG-0 is a galvanized carbon steel grating fastener used to fasten 1” high 19-space bar grating to minimal-thickness structural member edges. The GG-0 will clamp 1” grating to beam edges as thin as 0.05”. In some cases, the GG-0 will also work for 0.75” tall gratings G-Clip model GG-0 fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 50 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. MODEL GG-0 INFORMATION SHEET MODEL GG-0 ENGINEERING DETAIL -
Attach bar grating to flanges of angle shapes or channel shapes, where the flange of the shape is in a vertical plane.
Model GA- fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 50 pieces into a standard box. The principal part is the lower body assembly, a J-shaped assembly with a female thread, which hooks under the underside of (vertical) structural shape. The second part is the stamped top, which fits over the grating upper surface. The body and top are joined by a 1/4" - 20 threaded bolt, in proper length for the application. VIEW MODEL GA INFORMATION SHEET -
Attach Pultruded Grating to Steel Structures
G-Clip Model FSSGG is a 316-stainless steel grating fastener used to fasten pultruded bar grating to metal or other structural shapes, where the structural flange is in a horizontal plane. The specially shaped top is designed to fit pultruded grating shapes, while restricting the spreading of the bearing bars. G-Clip model FSSGG fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 25 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. MODEL FSSGG INFORMATION PAGE VIEW FSSGG-CLIP PRODUCT ENGINEERING DETAIL