Shop

G-Clips Model FFGN

Attach Wide Spaced Bar Grating to Structural Shapes
G-Clip model FFGN is a galvanized carbon steel grating fastener used to fasten grating with wide spaced bars, typically 38-space. Like many of our other G-Clips, they are for use where the structural flange is in a horizontal plane. G-Clip model FFGN fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 25 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. VIEW FFGN PRODUCT INFORMATION SHEET VIEW FFGN PRODUCT ENGINEERING DETAIL

Add to cart Details
G-Clips Model GG-2

Attach 19-space Bar Grating to Structural Surfaces Ranging in Thickness from .75” up to 1.25” thick.
G-Clip model GG-2 is a galvanized carbon steel grating fastener used to fasten 19-space bar grating to structural member edges ranging in thickness from .75” up to 1.25” thick. G-Clip model GG-2 fastener consists of three parts, which are assembled at our Louisiana factory into a complete installation unit, packed 50 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. VIEW GG-2 PRODUCT INFORMATION SHEET VIEW GG-2 PRODUCT ENGINEERING DETAIL

Add to cart Details
G-Clips Model GM

Attach Lightweight Devices to a Structural Surfaces thick.
G-Clip Model GM is a fastener used to fasten lightweight devices to 19-space bar grating. The GM-1/2” is designed to be used instead of J-bolts. It will withstand 1000 pounds of direct upward pull force. G-Clip Model GM fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 20 units to a standard box. The principal part is the lower body of the assembly, which is a specially stamped wing that is mechanically galvanized and holds captive a ½” zinc-plated nut. This lower body contacts the underside of the grating panel. The second part is the stamped top, which fits flat over the grating upper surface. The top is 2” wide and has an octagon shape. This plate is mechanically galvanized. The body and top are joined by the third part, a 1/2:” zinc-plated threaded stud. This stud is either 3” or 5” in length, depending on the job required. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. VIEW GM PRODUCT ENGINEERING DETAIL

Add to cart Details
Saddle Clips SSGF-1.5

Saddle clips are used to attach grating to structural members.
SSGF-1.5 Saddle Clip: Available 316-series stainless steel Saddle clips are used to attach 1-1/2” square mesh fiberglass grating to structural shapes. Grating Fasteners Model SSGF-1.5 is a 316 stainless steel grating fastener used to fasten 1-1/2” square mesh fiberglass grating to structural shapes. This particular fastener can be installed with a tek screw. The SSGF-1.5 saddle clip, is an M-shaped, stamped and formed piece of 16 gauge 316 stainless steel that fits over the grating upper surface. A hole is punched in the center of the clip to allow a 1/4” tek screw or other fastener to be used. Tek screws are not included with the saddle clips, but can be purchased separately. A 410 SS #14 screw is available. The screw has a 3/8” hex washer head. The point in the tek screw is a #3 point. This screw is available in two sizes, 1-1/2” or 2. (Other sizes can be requested) SADDLE CLIP INFORMATION PAGE SADDLE CLIP SSGF-1.5 INFORMATION PAGE

Select options Details
Saddle Clips GSCF-7

Saddle clips are used to fasten 15 spaced steel bar grating to structural members.
Grating Fasteners Model GSCF-7 is a galvanized steel grating fastener used to fasten 15 spaced steel bar grating to structural shapes. This particular fastener can be installed with a tek screw. The GSCF-7 saddle clip, is an M-shaped, stamped and formed piece of 14 gauge steel, galvanized, that fits over the grating upper surface. A hole is punched in the center of the clip to allow a 1/4” tek screw or other fastener to be used. Tek screws are not included with the saddle clips, but can be purchased separately. A zinc plated or 410 SS #14 screw is available. The screw has a 3/8” hex washer head. The point in the tek screw is a #3 point. This screw is available in two sizes, 1-1/2” or 2. (Other sizes can be requested) SADDLE CLIP INFORMATION PAGE SADDLE CLIP GSCF-7 INFORMATION PAGE

Select options Details