-
Galvanized carbon steel top and 316 stainless steel top fits 1- 3/16" c/l metal bar gratings.
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units, and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating, when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
316 stainless steel top is made to fit pultruded fiberglass gratings
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
316 Stainless Steel top fits specialty gratings on 2-3/8" bar spacing, and other wide-spaced gratings
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
316 Stainless Steel top fits into either a 3/4" or 1" wide slot of any grating
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
316 Stainless Steel top is designed to fit 1-1/2" square-mesh fiberglass grating
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
316 Stainless Steel top fits into 2" square-mesh fiberglass
Grating Fasteners designs include a number of different tops that are assembled with the patented G-Clips bottom, ready-to-install and sized to fit many grating sizes. G-Clips tops are available in quantities as separate units and provide more hold-down strength than typical saddle clips. Used with a self-drilling screw, G-Clips tops provide a superior method of attaching grating when compared to saddle clips. GT MODEL (TOP ONLY) PRODUCT INFORMATION SHEET -
Attach T-Bar Fiberglass Grating to Structural Shapes.
G-Clip model FFSCGC is a 316-stainless steel grating fastener used to fasten fiberglass T-bars to structural members. Like many of our other G-Clips, they are for use where the structural flange is in a horizontal plane. Other stainless steel tops are available for use with the SCGC gripjaw, to be used on popular pultruded and molded fiberglass gratings with a minimum of 3/8” opening. G-Clip model FFSCGC- fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 25 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is casting, with toothed-shaped segment facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. MODEL FFSCGC INFORMATION PAGE -
Attach Odd-spaced Fiberglass Grating to structures.
G-Clip model FFSSGG- is a flattened, 316-stainless steel grating fastener used to fasten odd-spaced bar centers to structural shapes, where the structural flange is in a horizontal plane. Specially modified top assembly is designed to span a total of 3-1/16" with good rigidity and fits flat across the top of the grating surface. G-Clip model FFSSGG- fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 50 units to a standard box. The principal part is the body assembly, which has a female-thread form in its upper portion. Body lower portion is die-stamped, with die-cut, toothed shaped segments facing upward, which contact the underside of the structural member. The second part is the specially-shaped stamped top, further modified, which fits flat over the grating upper surface. The top is 3- overall width, designed to span many odd bars The body and top are joined by a 1/4"-20 threaded bolt, in proper length for the application. MODEL FFSSGG INFORMATION SHEET VIEW FFSSGG ENGINEERING DETAIL -
Attach Pultruded Fiberglass Grating to fiberglass structures.
G-Clip Model FSSGF is a 316-stainless steel grating fastener used to fasten pultruded bar grating to fiberglass or coated steel structural shapes, where the structural flange is in a horizontal plane. The specially shaped top is designed to fit pultruded grating shapes, while restricting the spreading of the bearing bars. G-Clip model FSSGF fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 25 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, flatted pads facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. It is specifically designed for pultruded grating shapes. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. MODEL FSSGF INFORMATION PAGE VIEW MODEL FSSGF ENGINEERING DETAILS -
Attach Pultruded Grating to Steel Structures
G-Clip Model FSSGG is a 316-stainless steel grating fastener used to fasten pultruded bar grating to metal or other structural shapes, where the structural flange is in a horizontal plane. The specially shaped top is designed to fit pultruded grating shapes, while restricting the spreading of the bearing bars. G-Clip model FSSGG fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 25 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. MODEL FSSGG INFORMATION PAGE VIEW FSSGG-CLIP PRODUCT ENGINEERING DETAIL -
Attach devices to grating surface
Model GP-1 Available in Galvanized Carbon Steel. Model SSGP-1 Available in 316-Stainless Steel. The model GP-1 describes an assembly of fastener parts that can be used to fasten parallel grating panels to each other. The top part is a G-Clips unique top for better holding strength and to suit 19W4 grating. Second, a G-Clips patented bottom bar connects between the grating panel underside and projects sideways under the second grating panel. A hex-headed cap screw connects the two, and its length suits the grating height being installed Use of this model can reduce the deflection that often occurs when a single grating panel deflects downward due to traffic, and adjacent but unconnected panels cause an inadvertent trip hazard. By combining the strength of two panels, the load is shared, and deflection is lessened. Used properly, this can reduce trip hazards. VIEW MODEL GP INFORMATION SHEET -
Attach Close Mesh Grating to Structural Shapes
MODEL RSCGC is a 316-stainless steel grating fastener used to fasten close mesh bar grating to metal or other structural shapes, where the structural flange is in a horizontal plane. The narrow grip-jaw on the clip allows it to be used on gratings with as little as 3/8” opening. Our nickname for this part is “Cast Close-Grip.” G-Clip model RSCGC fastener consists of three parts, which are assembled at our factory in Louisiana, then packed 50 units to a box. The principal part is the grip-jaw portion of the assembly. This grip-jaw is cast stainless steel, with toothed-shaped segments facing upward. The second part is the stamped top, which fits flat over the grating upper surface. The round shape allows it to be used on almost any bearing bar configuration. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit the application, always 1/4” shorter than the height of the grating. MODEL RSCGC INFORMATION PAGE -
Attach Odd Shaped Bar Grating to Structural Shapes
G-Clip model RSSGG is a 316-stainless steel grating fastener used to fasten odd-shaped bar grating to metal or other structural shapes, where the structural flange is in a horizontal plane. Other stainless steel tops are available for use with the SSGG grip-jaw, to be used on popular pultruded and molded fiberglass gratings, or in highly corrosive environments. G-Clip model RSSGG fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 50 units to a standard box. The principal part is the grip-jaw portion of the assembly, which has a female-thread form in its upper portion. This grip-jaw is die-stamped, with die-cut, toothed-shaped segments facing upward, which contact the underside of the structural member. The second part is the stamped top, which fits flat over the grating upper surface. The body and top are joined by the third part, a 1/4"-20 threaded bolt. This bolt varies in length to suit what is required for the application. VIEW RSSGG PRODUCT INFORMATION SHEET VIEW RSSGG PRODUCT ENGINEERING DETAIL
-
Attach Lightweight Devices to 19 Space Bar Grating.
Grating Clip model SSGM is a stainless steel fastener used to fasten lightweight devices to 19-space bar grating. The SSGM-1/2” is designed to be used instead of J-bolts. It will withstand 1000 pounds of direct upward pull force. Due to its 316SS material, it can be used in corrosive environments. Model SSGM fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 20 units to a standard box. The principal part is the lower body of the assembly, which is a specially stamped wing that holds captive a ½” 316SS nut. This lower body contacts the underside of the grating panel. The second part is the stamped top, which fits flat over the grating upper surface. The top is 2” wide and has an octagon shape. The body and top are joined by the third part, a 1/2” B8M threaded stud. This stud is either 3” or 5” in length, depending on the job required. MODEL SSMG INFORMATION PAGE
