Saddle Clips

  • Saddle clips are used to attach grating to structural members.

    A popular method of attaching grating to structures involves formed metal pieces, variously called saddle clips, butterfly clips, and M-Clips, placed onto the grating top surface and attached with a suitable screw, bolt, or pin to the structure. All of our saddle clips are designed for use with a 0.25” diameter fastener.

    Saddle Clips offered by our company include the following units: GSCF-10: The most common saddle clip, this clip is used to fasten 19-space grating to structures. It has an oval-shaped hole, which will accommodate either a screw or a carriage bolt.

    SSF-10: This is the stainless version of the F-10 series. It is resistant to corrosion in most environments, due to its 316SS stainless steel material. SADDLE CLIP INFORMATION PAGE SADDLE CLIP F-10 INFORMATION PAGE  
  • Saddle clips are used to attach grating to structural members.

    A popular method of attaching grating to structures involves formed metal pieces, variously called saddle clips, butterfly clips, and M-Clips, placed onto the grating top surface and attached with a suitable screw, bolt, or pin to the structure. All of our saddle clips are designed for use with a 0.25” diameter fastener.

    Saddle Clips offered by our company include the following units:

    SSI-60-1: This saddle clip is designed for use on fiberglass, pultruded gratings that are 1” in height. Like the SSF-10, it is resistant to corrosion, due to its stainless steel material. SSI-60-1.5: This saddle clip is designed for fiberglass, pultruded gratings that are 1.5” in height or more. It can also be used on 1.5” square mesh fiberglass gratings. It is also made of stainless steel.

    SADDLE CLIP I-60 INFORMATION PAGE

    SADDLE CLIP SSI-60 INFORMATION PAGE

  • Saddle clips are used to attach grating to structural members.

    SSGF-1.5  Saddle Clip: Available 316-series stainless steel Saddle clips are used to attach 1-1/2” square mesh fiberglass grating to structural shapes. Grating Fasteners Model SSGF-1.5 is a 316 stainless steel grating fastener used to fasten 1-1/2” square mesh fiberglass grating to structural shapes. This particular fastener can be installed with a tek screw. The SSGF-1.5 saddle clip, is an M-shaped, stamped and formed piece of 16 gauge 316 stainless steel that fits over the grating upper surface. A hole is punched in the center of the clip to allow a 1/4” tek screw or other fastener to be used. Tek screws are not included with the saddle clips, but can be purchased separately. A 410 SS #14 screw is available. The screw has a 3/8” hex washer head. The point in the tek screw is a #3 point. This screw is available in two sizes, 1-1/2” or 2. (Other sizes can be requested) SADDLE CLIP INFORMATION PAGE SADDLE CLIP SSGF-1.5 INFORMATION PAGE  
  • Saddle clips are used to fasten 15 spaced steel bar grating to structural members.

    Grating Fasteners Model GSCF-7 is a galvanized steel grating fastener used to fasten 15 spaced steel bar grating to structural shapes. This particular fastener can be installed with a tek screw. The GSCF-7 saddle clip, is an M-shaped, stamped and formed piece of 14 gauge steel, galvanized, that fits over the grating upper surface. A hole is punched in the center of the clip to allow a 1/4” tek screw or other fastener to be used. Tek screws are not included with the saddle clips, but can be purchased separately. A zinc plated or 410 SS #14 screw is available. The screw has a 3/8” hex washer head. The point in the tek screw is a #3 point. This screw is available in two sizes, 1-1/2” or 2. (Other sizes can be requested) SADDLE CLIP INFORMATION PAGE SADDLE CLIP GSCF-7 INFORMATION PAGE  

Title

Go to Top